
Terms & Conditions
Terms & Conditions
1. Important Safety Notice
Aerial arts and suspended fitness are physically demanding activities and carry inherent risk, including the risk of serious injury or death. Please check all equipment before each use. MY2RG cannot be held responsible for injury or death resulting from misuse of equipment, improper installation, or use contrary to these terms.
2. Product Use, Risk and Responsibility
2.1 Use at your own risk. Our products are used at the Customer's own risk. We strongly recommend consulting a qualified professional or trainer for installation, rigging, and correct gripping and handling techniques.
2.2 Customer responsibility. By purchasing, the Customer accepts responsibility for their own safety and for the safety of any students, members, or other users of the equipment.
2.3 Regular inspection. The Customer must inspect all equipment, fabric, ropes, hardware, joints, and connections before each use and at regular intervals. Any item showing wear, damage, looseness, or deformation must be taken out of use and replaced immediately.
2.4 Safety systems. Suspending oneself from a height carries real risk. Users should always be aware of these risks and should use appropriate safety measures, such as crash mats, a safe working height, and qualified supervision.
2.5 Load and purpose. Equipment must be used only for its intended purpose and within the load limits communicated by the Company. Any use beyond these is at the Customer's own risk.
2.6 Installation and site suitability. Unless installation is expressly included in the quotation or invoice, the Company supplies products only. The Customer is responsible for ensuring that the ceiling, beam, wall, floor, anchors, and supporting structure are sound and suitable for the intended load, and that installation is carried out by a qualified person. Where the Company does install, its responsibility is limited to its own scope of work and does not extend to the strength or condition of the existing structure.
3. Orders and Payment
3.1 100% advance payment. Payment is required in full, in advance, before an order is processed or dispatched.
3.2 For custom fabrication orders, work begins only after the agreed advance payment is received. The balance, if any, is payable before dispatch or delivery unless agreed otherwise in writing.
3.3 The Company may withhold dispatch or delivery until full payment is received.
3.4 Prices, specifications, and availability may change without prior notice. The price confirmed in the invoice or quotation applies to that order.
4. What the Price Includes
The price of products includes importing, shipping, insurance, and customs clearance fees, subject to the Shipping Policy below. Freight adjustments, if applicable (for example, air shipping or remote locations), will be communicated and agreed before dispatch.
5. Shipping Policy
5.1 International shipping. We partner with FedEx, Aramex, or UPS.
5.2 Local shipping. Surface shipping from Mumbai to any destination outside Mumbai takes approximately 5 to 6 days.
5.3 Air shipping. Please contact us for freight adjustments.
5.4 Customer pickup. If you prefer to arrange your own pickup, INR 680 will be deducted from your invoice.
5.5 Delays. We strive for timely delivery. Delivery dates are estimates only. We are not responsible for delays caused by courier or transport partners, customs, weather, strikes, government restrictions, or other circumstances beyond our reasonable control, or by late payment or late approvals from the Customer.
5.6 Risk in transit. Risk passes to the Customer on delivery or handover to the carrier. Please inspect goods on receipt (see Clause 6).
6. Inspection, Defects and Exchange
6.1 Defect notification. Any factory defect must be reported within 2 days of receipt.
6.2 Unboxing video required. An unboxing video, recorded from the moment the package is opened and showing the defect clearly, is required for any exchange claim. This ensures the product has not been tampered with after receipt.
6.3 Exchange. Where a factory defect is verified in line with Clauses 6.1 and 6.2, the defective product will be replaced.
6.4 Claims reported after the notification period, or without an unboxing video, may not be accepted.
6.5 Items damaged through misuse, improper installation, overloading, normal wear and tear, or modification by the Customer or any third party are not treated as factory defects.
7. Returns and Refunds
7.1 Standard products are exchanged only for verified factory defects under Clause 6. Returns or refunds for change of mind are not available unless agreed by the Company in writing.
7.2 Custom fabrication. All custom fabrication work is made to order on the Customer's request and agreed specifications. It is non-returnable and non-refundable, and cannot be cancelled or exchanged once fabrication has begun, including for change of mind, change of requirements, or change of site. This does not affect the Company's commitment to correct genuine workmanship defects under Clause 8.
7.3 Advance payments for custom work are used to purchase material and begin production, and are not refundable once work has started.
8. Custom Fabrication Work
8.1 Made to order. Custom items are fabricated to the Customer's requirements, dimensions, and specifications as discussed and agreed. They are not standard catalogue products.
8.2 Material. Unless otherwise stated, all custom work is fabricated using SS-304 stainless steel tubes / rods, as agreed with the Customer.
8.3 Agreed specifications. Dimensions, tube or rod diameter, wall thickness, length, shape, quantity, and finish are as stated in the quotation, drawing, or confirmed message (WhatsApp, email, or written note). Where details were discussed verbally, the Company's work order or job card, as confirmed by the Customer, is the agreed record.
8.4 Tolerances. Minor variations in dimensions, weld appearance, surface finish, or colour tone within normal fabrication tolerances are not defects.
8.5 Customer approval. The Customer is responsible for checking and confirming all dimensions, drawings, and specifications before fabrication begins. Once fabrication starts, the specification is treated as approved. Changes requested later may affect price and delivery time and are accepted at the Company's discretion.
8.6 Customer-supplied designs. Where the Customer supplies the design, the Customer confirms they have the right to use it and is responsible for its suitability.
9. Limited Warranty on Custom Fabrication: 2 Weeks
9.1 The Company provides a limited warranty of 2 (two) weeks from the date of delivery or handover, covering defects in workmanship only (for example, a faulty weld or a fabrication error against the agreed specification).
9.2 The Customer must report any issue in writing (WhatsApp or email) with photos or video within this period.
9.3 At its discretion, the Company will repair or rectify the defective part, or replace it where repair is not suitable.
9.4 The warranty does not cover:
-
wear and tear, scratches, dents, discolouration, or surface rust arising from environment, humidity, salt air, or chemicals;
-
damage from misuse, overloading, accidents, or use beyond the intended purpose;
-
improper installation, mounting, or fixing, or unsuitable ceilings, beams, walls, anchors, or supporting structures;
-
modification, repair, or welding by anyone other than the Company;
-
accessories, fittings, rope, fabric, or components not supplied by the Company;
-
normal ageing and maintenance-related issues.
9.5 The warranty is non-transferable and applies only to the original Customer.
10. Limitation of Liability
10.1 To the fullest extent permitted by law, the Company is not liable for injury, loss, or damage arising from the use of its products where this results from misuse, overloading, unsuitable installation or site, lack of inspection or maintenance, failure to replace worn parts, or use contrary to these terms.
10.2 To the fullest extent permitted by law, the Company's total liability in connection with any order, whether in contract or otherwise, is limited to the amount paid by the Customer for the item concerned.
10.3 The Company is not liable for indirect, incidental, or consequential loss, including loss of business, income, or reputation.
10.4 Nothing in these terms excludes or limits any liability that cannot be excluded or limited under applicable law.
11. Intellectual Property
Drawings, designs, product images, website content, and methods prepared by the Company remain its property and may not be copied or reproduced without written permission.
12. Force Majeure
The Company is not liable for failure or delay caused by events beyond its reasonable control, including natural calamities, strikes, government restrictions, customs or import holds, supply disruptions, or transport interruptions.
13. Customer Support and Grievances
We welcome feedback and aim to resolve concerns quickly and fairly. Please contact us with your order details, photos, and videos:
-
Email: [add email]
-
Phone / WhatsApp: [add number]
-
Grievance contact: [add name and email]
Both parties will first try to resolve any concern amicably through discussion.
14. Governing Law and Jurisdiction
These terms are governed by the laws of India. Subject to applicable law, any dispute is subject to the exclusive jurisdiction of the courts at Navi Mumbai / Thane, Maharashtra.
15. Acceptance and Changes
By placing an order, paying, or accepting delivery, the Customer confirms that they have read and agreed to these terms, including the safety notice, the no-return policy on custom work, and the limited warranty. MY2RG may update these terms from time to time; the version on the website at the time of the order applies.
Company Details
MY2RG Products and Solutions LLP Registered Office: 1804, Signia Waterfront, Sector 14, Airoli, Navi Mumbai 400708, Maharashtra, India Marketing Office: Kamdhenu 23 West, Office 310, TTC Industrial Area, Pawne, Navi Mumbai 400705, Maharashtra, India GSTIN: 27ABOFM9946Q1ZY
Return & Exchange Policy
No return or cancellation is possible on products, unless they are damaged product when sold.
Goods will be dispatched on First come first serve basis. As the sale is valid across India, it is possible that two people simultaneously place an order for limited stock quantity Online. The product will be given on first-paid basis. If order is booked over the available quantity, the amount will be refunded.
Most of the products will come original BOX packing. Gift-wrapping for this item is possible on request with an additional cost.
